
Ethernet Modules
322
35013379 02 October 2007
Specifications The main specifications for the Quantum 140NOE771xx Ethernet Modules are
described in the following table
Specifications
Communication Ports One auto-sensing 10/100Base-T shielded twisted
pair (RJ-45 connector) port and one 100Base-FX
(MT-RJ connector) port. Both ports transmit and
receive Modbus commands encapsulated in TCP/IP
protocol. Only one port can be used at a time.
Bus Current Required 750 mA
Power Dissipation 3.8 W
Fuse None
Programming Software
Type and version Concept, Ver. 2.2 or higher (NOE77100/10)
Concept, Ver 2.5 or higher (NOE77101/11)
Modsoft, Ver. 2.6 or higher (NOE77100/10)
ProWORX NxT, Ver 2.1 or higher (NOE77100/10)
ProWORX NxT, Ver 2.2 or higher (NOE77101/11)
Firmware
CPU Type and version Quantum Executive, Ver. 2.0, or higher
NOE Upgradeable Field Upgradeable via FTP or Programming Panel.
Operating Conditions
Temperature 0 to +60° C
Humidity 0 to 95% Rh non-condensing @ 60° C
Altitude 15,000 ft (4500 m)
Vibration 10-57 Hz @ 0.0075 mm d.a
57-150 Hz @ 1 g
Storage Conditions
Temperature -40 to +85°C
Humidity 0 to 95% Rh non condensing @ 60°C
Free Fall 1 m unpackaged
Shock 3 shocks / axis, 15 g, 11 ms
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123 www.barr-thorp.com
Komentáře k této Příručce