Schneider Automation Modicon Quantum Ethernet Uživatelská příručka stáhnout pdf (Strana 706)

100

101

I/O Modules

706

35013379 02 October 2007

140DVO85300 I/O Verified 10-30 VDC Out Module

Overview The Quantum Verified Output module is a 10 ... 30 Vdc, 32 point output module with

diagnostic capability. The module will detect and report the output state sensed at

the field connector and, depending on the selected configuration, will verify that the

output point is in the state commanded by the PLC. The module is configured in four

groups of eight source outputs.

Specifications Key specifications for the Quantum 140DVO85300 module are as follows:

Specifications

Number of Output Points 32 in four 8 point groups

LEDs Active (Green): Bus communication present.

1 ... 32 (Green): Indicates output point status.

F (Red): Indicates incorrect output state on a channel,

loss of field power, or blown fuse.

Required addressing 2 words in, 2 words out

Voltage

Operating 10.0 ... 30 Vdc

Absolute Maximum 50 Vdc for 1.0 ms decaying voltage pulse

On state Drop/Point 0.4 Vdc @ 0.5 A

Maximum Load Current

Each Point 0.5 A

Each Group 4 A

Per Module 16 A

Off State Leakage/Point 0.4 mA @ 30 Vdc

Surge Current Maximum

Each Point 2.5 A @ 1 ms duration (no more than 6 per minute)

Response ( Resistive Loads)

OFF - ON 1 ms (typical), 2 ms (max)

ON - OFF 1 ms (typical), 2 ms (max)

Load Inductance Maximum 0.5 Henry @ 4 Hz switching frequency, or:

where:

L = Load inductance

I = Load current (A)

F = Switching frequency (Hz)

L =

0.5

This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123 www.barr-thorp.com

1 2 ... 701 702 703 704 705 706 707 708 709 710 711 ... 899 900

Komentáře k této Příručce

Žádné komentáře

Schneider Automation Modicon Quantum Ethernet Uživatelská příručka Strana 706

Komentáře k této Příručce

Související produkty a manuály pro Servery Schneider Automation Modicon Quantum Ethernet